AC Motor & Generator Services

Beaver Electrical provides preventative, predictive, and reliability based maintenance and repair for AC motors and generators.

Preventive maintenance (PM) and predictive maintenance (PDM) are familiar terms, but the tasks associated with these methods of maintaining and extending the operating life of electric motors and generators aren't always clear. Beaver provides a complete set of strategies all under the umbrella of reliability-based maintenance (RBM). 

Preventive maintenance (PM). 

The primary goal of PM is to assess motor health through inspections and tests. For example, the condition of a winding is determined by the megohm value from an insulation resistance (IR) test. Electrical tests typically include measuring IR (with motor shut down) and individual phase voltages and currents (during normal operation). Mechanical assessments in a PM program usually include vibration analysis (FFT spectra) and alignment.

Other PM activities commonly include cleaning and inspection; lubrication and lubricant level checks; and adjustment of belt tension and bolt tightness. Thermal scanning with an infrared camera is also common. Noise levels can be assessed subjectively or with acoustical analysis equipment.

Predictive maintenance (PdM)

Predictive maintenance forecasts when to perform corrective maintenance, or when to expect a failure. Also called condition monitoring, PdM consists of trending and assessing most of the activities associated with PM. PDM usually trends electrical activities like IR and polarization index (PI) tests and sometimes motor circuit parameters, current and voltage levels, and MCSA results. Trending of mechanical routines normally includes the vibration spectra and occasionally thermal scan test results. As an example, if the megohm value of the winding insulation was initially acceptable but trending lower, that trend can be used to schedule corrective maintenance before the IR value drops dangerously low, or to predict when it will be too low to operate the motor safely.

Reliability-based maintenance (RBM)

RBM, also called reliability-centered maintenance (RCM), is a method for determining the best combination of maintenance activities to enhance equipment reliability and safe operation. These include cleaning and lubrication as well as repair or replacement of failed components. Reliability expresses the probability that a motor will perform properly for a specified time, under stated conditions. RBM reduces maintenance to the most cost-effective activities, so it requires understanding of motor failure characteristics, manifestations, and consequences. Motor stator mid re wind with coils showing

Our two locations in British Columbia, repair and rewind electric motors, transformers, generators, and other industrial electro-mechanical  apparatus.

All Beaver facilities are ANSI/EASA AR100 Accredited Service Centres. We are members of Green Motors Practises Group.

In addition, for over 20 years, our Burnaby shop has CSA Hazardous Location certification for servicing the motors designed for hazardous environments.